I had a problem with the travel of the wheel on the RedBull Racetrack in Austria because the passenger-side wheel was touching the Fender in T10. The Suspension (KW DDC Plug&Play) is on the highest possible point and it is all ready nearly too low (326mm). So I talked to KW and the sold me new Springs for the Front Suspension. I replaced the old Springs „2041 04G19“ with the new the stiffer ones „2025 23M22“ and now I was able to bring down the adjustable Coilover Spring Plate by one cm. And that gives me the accepted hight by the Austrian TÜV (340mm between the Fender and the middle of the Wheel).
– Innovative 2-Core In-Series System – Front Core Features 14 Rows, Secondary In-Series Backside Cooler Has an Additional 5 Rows of Cooling for – ~40% Increase in Heat Rejection – Converted to a Single-Pass Design with High-Pressure Return Line for Optimal Flow – Made With CSF’s AC Condenser Technology Using a 1-Row Super High-Pressure 26mm Multi-Channel Microtube – High Density, Multi-Louvered Fin Design for Maximum Surface Area Contact – “Drop-in Fit” Requires No Modifications to Install
Today the M2/3/4 Lower Control Arm and Tension Strut got installed. In my case the upgrade adds -1.2° of camber.
After a Testdrive, I have to say it increases grip and speed of turning, and I’m very happy with the ///M Parts.
I converted back to the Original Lower Control Arm and Tension Strut because the Passenger Side Wheel was touching the Fender on the RedBull Racetrack in Austria (T10). Now the wheel has enough place and the camber of the fronts is actually -2°.
Today I replaced the original Diverter Valve with the Turbosmart VR9 and the original plastic Turbo Inlet Pipe with the Turbo Inlet Pipe from MST. It was a pain, but with some help and hours of work, 😩😓 I finished the job.
The Display from Avinusa.com is outstanding and works perfectly. I can highly recommend this product. The big Touchdisplay makes it easy to work with it.
I have also tested two other Boxes but without success. The worst box came from Skandinav.de and did not work. The Support is horrible, and most of the time you get only a “received message” but no answer. They are incompetent, so I can not recommend the Products from this Company.
After I lost one of my Carbon Mirror Caps I bought a new Set of Mirrors from Carbon Invasion. It is a Mirror Conversion Set with a plastic upper, a lower part and a carbon mirror cap. Looks like M2C Mirrors… The fitting accuracy is not 100% but for that price it is OK!
I got the KW DDC Plug&Play adjustable Coilover suspension! My first impressions are that it is a great product. In Comfort Mode, the suspension is smoother and in Sport/Sport+ Mode it is even harder, I like it very much :-). I also added 10mm H&R Trak+ Spacers to all Wheels.
I got the M4 Style Prepreg Carbonfiber Mirror Caps from Burkhart Engineering.
Except for the Plastic Mounting Clips the Prepreg or Dry Carbon Mirror Caps are made of 100% Carbon and created with Autoklav which gives us a high surface quality and low weight.
The original plastic Chargepipe and the rubber Boostpipe (TIC) where replaced by a Alu Version from FTP Motorsport.
The original Brakelines where replaced by braided brakelines from Burkhart Engineering.